● Rated load of 4200KG, easily passing professional testing standards for 120% dynamic and 150% static loads.

● Manual bilateral unlocking and 24V low voltage operation device.

● The column bottom plate is 500mm wide, with a large contact area with the ground, making the lift more stable and reliable.

● The upper crossbeam design has a maximum height of 3835mm and an effective height of 3706mm, making it more suitable for lifting high roofed vehicles.

● Equipped with 2+3 standard arms and a quick insert adjustable ultra full tray, the minimum height above the ground is only 95mm, suitable for vehicles with different chassis.

● The pulley inside the column is installed towards the oil cylinder side, which can effectively prevent the pulley from coming out even if the retaining ring falls off.

● The crossbeam is equipped with a device to prevent pulleys and steel wire ropes from coming out.

● Using fuel free polymer ultra wear-resistant material sliding blocks, it has a long service life, stable and reliable operation, and can be quickly replaced and adjusted.

● Using aviation grade steel wire rope can effectively ensure synchronization between the two sides of the stagnation platform. The Yan Kong steel wire rope has good linearity, small diameter tolerance, and soft waiting points, which can better meet the requirements of use.

● The hydraulic cylinder joint is equipped with an anti pipe burst throttle valve, which can effectively prevent accidents caused by oil pipe bursts.

● The main structural components are welded by robots, with good welding consistency, high strength, and beautiful welds.

● The structural components are sprayed with imported powder using imported spraying equipment and high-temperature treatment, ensuring strong adhesion and bright and beautiful colors.